DASH | Alerion Express 28 | 28ft

South Dartmouth, MA, US

 

DASH | Alerion Express 28 | 28ft

$75,000

South Dartmouth, MA, US

About

New England summertime boat. Stored indoors every winter and maintained by the same yard since Day One. Boat looks and feels close to new, with some of the best looking bright work (updated 2020) on deck. One look and you will say, "She's a winner!"

Specifications

  • Length: 28ft
  • Builder: TPI
  • Beam: 8' 2"
  • Draft: 4' 6"
  • Year: 2006
  • Hull: Fiberglass
  • Engine: (1) Yanmar, 14 hp

SPECS

  • Builder: TPI
  • Designer: Carl Schumacher
  • Keel: Fin Keel

MEASUREMENTS

  • Length Overall: 28.00 ft
  • Length Waterline: 22.83 ft
  • Max Draft: 4' 6"
  • Ballast Weight Measure: 2200.00 lb
  • Beam Measure: 8' 2"

ENGINE(S)

  • Engine Brand: Yanmar
  • Year Built: 2006
  • Engine Type: Outboard 4 Stroke
  • Engine/Fuel Type: Diesel
  • Engine Power: 14 hp

Accommodations

  • Number of heads: 1

CONSTRUCTION

HULL SHELL

  • Infusion Molded (SCRIMP) GRP with bi-axial and unidirectional E­ glass reinforcing fabrics
  • End grain balsa core
  • Vinyl ester resin Gelcoat reinforcing layer
  • Awlgrip Flag Blue topsides with White boot stripe

 

HULL STRUCTURE

  • Keel floors, keel sump, engine bed, mast step and longitudinal stringers molded integrally with the hull during the SCRIMP process

 

DECK

  • Resin infused (SCRIMP) GRP sandwich structure with biaxial reinforcing fabrics and end grain balsa
  • White deck with molded smoke grey contrasting non-skid

 

HULL TO DECK JOINT

  • Flange type joint bonded with Plexus MA550 adhesive (ABS approved)
  • Full-length varnished teak toerail

 

BALLAST KEEL

  • Fin with integral bulb for low center of gravity.
  • One-piece lead casting alloyed with antimony bolted to molded keel sump with 304 grade stainless steel bolts

 

STRUCTURED BULKHEADS

  • Marine grade white laminate plywood bulkheads bonded to hull and deck

INTERIOR

  • Marine grade plywood bulkheads with white, low-maintenance laminate with varnished teak trim.
  • Vinyl overhead with varnished teak trim around ports.
  • Generous V-berth forward
  • Port side settee; stbd. side sink and single settee
  • Sealand portable marine head
  • 38 qt. icebox/ companionway step w/teak and holly lid
  • Kenyon stove
  • Fresh water
  • Varnished teak and holly cabin sole

PLUMBING

  • Manually operated bilge pump in cockpit
  • Electric bilge pump with float switch
  • Oversized cockpit and side deck drains

ELECTRICAL

  • 12VDC system built to A.B.Y.C. standards
  • 12 Volt Starting battery
  • DC electrical panel w (8) circuit breakers
  • Guest battery switch
  • (2) Swivel reading lights
  • (2) Overhead dome lights
  • Navigation lights
  • Mast and chain plates grounded to keel for lightning protection to meet A.B.Y.C. standards

ELECTRONICS and NAVIGATION EQUIPMENT

  • Garmin GPS MAP XS
  • Raymarine wind/depth/speed
  • ICOM VHF
  • Fusion Bluetooth radio and speakers (new 2016)

DECK HARDWARE

  • Hoyt Jib boom with Light Air Extender
  • (2) Lewmar 14 self-tailing cabin top winches
  • Harken Roller furling for 95 self-tacking jib, with port and starboard side sheeting
  • Harken mainsheet led to 4:1 traveler system mounted on aft deck
  • Harken mainsheet cam base and block mounted on a barney post
  • (2) 10” aluminum winch handles
  • Adjustable (8:1) backstay below deck with lead to cockpit
  • 19” X 19” Lewmar deck hatch with smoke tint
  • (4) Fixed elliptical Bomar portlights
  • (6) 8” Mooring cleats -- (2) forward, (2) aft, (2) midship
  • Custom-cast chocks for forward and midship cleats
  • Teak and Lexan companionway hatch slider with Lexan drop­in washboard
  • Halyards led aft thru deck-mounted Harken fairleads and clutch stoppers port and starboard
  • Custom stainless stem head with welded jib tack and fair lead ring
  • Teak handrails on cabin house
  • Teak toe rail
  • Self-draining cockpit
  • Flag, teak flag pole and socket

STANDING AND RUNNING RIGGING

  • 1x19 stainless wire standing rigging with open barrel turnbuckles
  • Continuous rigged system for easy rig tuning
  • Custom port and starboard chain plates
  • Internal main and jib halyards
  • Lazy-jacks and single line reefing for mainsail
  • Windex
  • Hall Quick Vang system

ENGINE

  • 2006 Yanmar Sail drive, 2-cylinder, 14 hp Diesel, Outboard 4S

SAILS

  • North Sails main and jib
  • Mainsail cover (New 2017)

STEERING

  • Laminated teak tiller with extension
  • GRP rudder with stainless steel shaft tube and polished stainless steel rudder head
  • Balanced spade rudder with elliptical profile and low-drag section

DISCLAIMER
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

 

 

How Can I Help?