Little Harbor 50 forward port quarter under sail.

ENDEAVOR | Little Harbor | 50

Harpswell, ME, US

Little Harbor 50 starboard forward quarter in the water.
Little Harbor 50 profile on the water.
Little Harbor 50 aft starboard quarter aerial perspective.
Little Harbor 50 aft starboard quarter in the water.
Little Harbor 50 bow rail.
Little Harbor 50 foredeck in the water.
Little Harbor 50 midships aft.
Little Harbor 50 midships forward.
Little Harbor 50 cockpit from port.
Little Harbor 50 cockpit forward, aerial view.
Little Harbor 50 cockpit detail.
Little Harbor 50 B&G sailing instruments.
Little Harbor 50 controls at helm.
Little Harbor 50 cockpit looking aft, table extended.
Little Harbor 50 main salon from galley.
Little Harbor 50 main salon looking forward, table extended.
Little Harbor 50 tide and barometer.
Little Harbor 50 main salon port forward to cabin.
Little Harbor 50 forward cabin V-berth.
Little Harbor 50 forward cabin aft.
Little Harbor 50 forward v-berth and adjacent head.
Little Harbor 50 forward shower teak seat.
Little Harbor 50 forward guest bunk cabin.
Little Harbor 50 main salon starboard.
Little Harbor 50 galley looking forward.
Little Harbor 50 Force 10 oven and stove.
Little Harbor 50 galley looking aft.
Little Harbor 50 nav station starboard aft.
Little Harbor 50 nav station with instruments.
Little Harbor 50 guest cabin looking aft.
Little Harbor 50 aft guest cabin storage detail.
Little Harbor 50 guest cabin aft with vanity.
Little Harbor 50 aft guest cabin lockers.
Little Harbor 50 aft guest cabin into head.
Little Harbor 50 aft guest cabin shower.
Little Harbor 50 transom under sail.
Little Harbor 50 under sail.
Little Harbor 50 full rig in the water.

About

REMARKS

The new owner of ENDEAVOR is going to benefit from an extensive refit at Hinckley Rhode Island 2025-2026 – see the details toward the end of this listing.

ENDEAVOR is a rare aft-cockpit Hood-designed Little Harbor 50 featuring three private cabins, a spacious main salon and oversized cockpit for comfortable cruising and entertaining. Her moderate displacement hull with 5’–10” shoal draft keel/centerboard configuration, driven by a tall, efficient sail plan, provides exceptional all-around performance. Her shoal draft also allows one access to waters usually limited to smaller boats. Her handsome looks, meticulously-crafted joinerwork and extensive equipment list make ENDEAVOR a must-see for one looking for value in a quality sailing yacht in this size range.

ACCOMMODATIONS and LAYOUT

ENDEAVOR sleeps six in three private cabins plus two in the main salon, with two heads and a stall shower. The interior is richly finished satin-varnished teak with solid trim, grab rails, raised-panel cabin doors, laminated teak and holly deck beams, and solid teak hull ceilings. Floorboards are varnished teak and holly with removable overhead panels secured by varnished teak trim. Bureau countertops are varnished teak with holly inlays.

Ample shelving, bookshelves and teak handholds are provided throughout. Full-length mirrors are provided in each stateroom, and all berths have lee cloths. All water and fuel tanks are located below cabin sole level, providing extensive storage area under seats and furniture throughout the interior.

Starting forward, a large forepeak locker accessed via a deck hatch accommodates anchor rodes, sails and assorted deck hardware. A solid bulkhead separates this area from the forward cabin. This oversized cabin offers a generous V-berth with filler, a seat with vanity to port and a

hanging locker with bureau to starboard. There are also additional drawers below the berths and aircraft-style lockers above each berth. A large deck hatch and deck prisms provide great ventilation and light.

Aft to starboard is a guest cabin with upper and lower berths, hanging locker, bureau and lockers above each berth. An opening porthole, deck hatch and prism provide ventilation and light.

To port is a head shared by each cabin featuring an electric flush toilet, a porcelain sink, vanity with Corian counters, mirror, varnished teak floor grate and opening hatch and porthole for ventilation. Aft of the head is a shower stall with teak seat, varnished teak floor grate and locker outboard.

The full-beam main salon features an L-shaped settee to starboard facing a large centerline settee with dining table beautiful featuring a starburst-patterned highlighted by inlays and fold-up table leaves. There are cabinetry and shelves outboard, with a bureau and more shelving on the forward bulkhead. To port is a full-length settee with cabinetry and shelving outboard. Multiple opening portholes, dorade vents and deck hatches make this central living area light and airy.

  • Aft of the main salon is the wrap-around galley with many features including:
  • Double stainless steel sinks with stainless/Corian counters
  • Tasco three-burner propane stove and oven
  • Top-loading refrigerator and freezer
  • Stainless trash compactor
  • Retractable faucet with manual salt and freshwater faucet
  • Custom dish and glass storage

Further aft of the galley is the nav station conveniently located adjacent to the companionway. There is a dedicated seat with backrest, generous chart table and direct access to the navigation systems and electrical switch panels.

Opposite to port is the third cabin with twin berths, bureaus, hanging locker, numerous storage lockers and a vanity sink with mirror. Three opening portholes and a deck hatch keep this cabin well-lit and ventilated. The second head is adjacent with electric toilet, varnished teak grate and shower.

ELECTRONICS and NAVIGATION EQUIPMENT

  • B&G Sailing instruments with Zeus plotters at helm and Nav (2026)
  • Ritchie helm compass
  • Stereo with multiple speakers

ELECTRICAL SYSTEM (see refit details)

New 12Volt charging system

The yacht’s DC electrical supply is 12 Volt, supplied by three independent battery systems: House, Start and thruster batteries all new 2026.

GFIC waterproof 12 Volt outlets are located at the steering pedestal and nav station.

The yacht’s AC electrical system is 110 Volt/60 cycle. AC power is supplied by a 50 amp shore power inlet with 50 amp cords and 30/50 adapter. AC functions include: Water heater, refrigeration, electrical outlets, air conditioning, A/C outlets

The main switch panel is a Blue Seas located outboard of the nav station and includes: DC and AC branch circuit breakers with backlighting, battery test meters, reverse-polarity indicators, DC and AC voltage and load current meters, DC and AC voltage and amp meters.

Engine, rudderpost, mast step, chain plates and seacocks are grounded to a 6″ copper strap, glassed to hull running from bow to stern on both sides of hull. A copper screen is glassed into the hull for radio antenna grounding. A separate grounding bar is installed for electronics.

Lighting:

  • Running lights
  • Masthead light
  • Steaming light
  • Foredeck light
  • Compass light
  • Overhead LED lights and brass reading lamps
  • Combination red/white light at nav area
  • Low-voltage red night lights throughout interior
  • Automatic on/off switches provided for hanging lockers

ENGINE and MECHANICAL EQUIPMENT

  • New 2026 110hp Yanmar diesel engine (Hours: approx. 25, 11/26)
  • Excellent engine access via lift-up settee in main salon
  • Stainless 1-½” propeller shaft
  • 3-blade max feathering prop with line cutters and stainless steel deflectors
  • Morse twin-lever shift/throttle controls
  • New SeaFrost refrigerator and freezer holding plate system
  • New Cruisair reverse-cycle air conditioning with (2) zones
  • 110 A/C hot water heater with heat exchanger
  • Stainless hot water tank
  • Domestic freshwater pump with accumulator tank
  • (1) Electric automatic bilge pump
  • (2) Manual bilge pumps
  • (2) Jabsco electric freshwater toilets
  • Holding tank for forward head with pump-out and direct overboard options
  • Tank tender level gauges

SAILS and RIGGING

Rigging:

  • Hood Stoway double spreader rig with in-mast furling mainsail
  • Selden genoa furler
  • Navtec standing rod rigging
  • Removable inner forestay with running backstays
  • Spinnaker/whisker pole stored on mast
  • Navtec hydraulic backstay and boom vang
  • Harken mainsheet traveler system with Lewmar Spinlock stoppers

Sails:

  • North 3di furling mainsail (2026)
  • North 3di furling 130% genoa (2026)
  • North Gennaker (2026)

Winches:

  • (2) Lewmar Evo self-tailing electric primaries (new 2026)
  • (1) Lewmar electric mainsheet/outhaul winch with jammer
  • (2) Lewmar EVO self-tailing electric secondaries (new 2026)
  • (3) Barient #22 self-tailing halyard winches
  • Merriman centerboard hoist winch

HULL and CONSTRUCTION

The hull is molded in GRP from female molds with 3/4″ Airex foam core for added strength and sound/thermal insulation. Airex core material is eliminated in areas of sheer line, centerline, ballast, rudderpost, hull ports and through-hulls, with solid GRP lay-up in these areas. Molded fiberglass fuel and water tanks and centerboard trunk with internal cast lead ballast. There is a painted teak rub rail with stainless steel striker for topside protection in docking situations.

The deck is hand-laid teak over GRP, with Divinycell H-80 foam core for strength and stiffness. In areas where deck equipment is installed, core is replaced with Divinycell H-200 high-density foam. Outer skin is built to 1/4″ thickness, inner skin to 3/16″. Cockpit sides and coaming are solid fiberglass. Deck flange is solid glass to approximately 3/8″ thickness. The deck is bonded with epoxy putty to the inboard angled hull flange and bolted with 5/16″ bolts on 8″ centers. Additional fastenings are provided with a teak toe rail through-bolted on 8″ centers. All deck hatch landings are molded in GRP. The propane locker is molded separately into the cockpit combing and ventilated with direct drain overboard.

The rudder blade was new in 2017 and is molded around a stainless steel frame welded to the rudderstock and supported by upper and lower bearings (also new 2017). A bronze stuffing box is provided with Teflon impregnated packing. The weighted centerboard is molded GRP with a bronze shoe.

Hull finish is Awlgrip Flag Blue with gold cove stripe, double white boot and green bottom. Cabin house and cockpit area is white with light tan non-skid.

DECK HARDWARE and MISC EQUIPMENT

  • Maxwell 2200 vertical anchor windlass with chain stopper and second rope/chain hawse pipe to port
  • 60 lb CQR anchor with 250’ all chain rode
  • Danforth anchor with rode and chain
  • Fisherman’s anchor with rode and chain
  • Custom stainless steel stem head with anchor rollers
  • Stainless spring line and stern chocks
  • (6) Stainless deck hatches
  • (13) Stainless opening portholes with screens
  • (8) Stainless cowl vents
  • Varnished teak toe rails, drip rails, grab rails, dorade boxes, and cockpit trim
  • Varnished teak companionway hatch boards with companionway screen slides and zip door option
  • Custom Stamoid dodger with opening front and elkhide grab bar
  • Cockpit cushions
  • Molded steering pedestal with varnished teak table with fold-up leaves
  • Stainless steering wheel with varnished teak rim
  • Side boarding step
  • Teak and stainless transom-mounted fold-down swim ladder with gate
  • Salt water washdown with spigot on foredeck
  • Fresh water washdown with spigot in cockpit
  • Emergency tiller
  • Fenders and covers
  • Fender boards
  • Dock lines
  • (2) Boat hooks
  • Varnished teak ensign pole
  • Bosun’s chair
  • Cabin sole covers
  • Steering pedestal, wheel and table covers

SAFETY EQUIPMENT

  • (8) PFDs
  • Life sling
  • Sea anchor
  • Radar reflector
  • Fire extinguishers
  • Kahlenberg air horn

REFIT 2025-2026

  • Yanmar 110hp engine
  • New AC including duct work: 10K BTUs in fwd cabin and v-berth, 8K BTUs to aft cabin
  • New Seafrost refrigeration with new cold plates
  • Replaced domestic water system
  • Centerboard removed, cable inspected, bearing, bushing and pin replaced
  • Propane system all replaced
  • New shift and throttle controls
  • Fuel and water tanks inspected and cleaned
  • New heads and plumbing

EXCLUSIONS

  • Pictures/artwork

FREQUENTLY ASKED QUESTIONS

  • What are the key specifications and location of the 1986 Little Harbor 50 ENDEAVOR? She is an aft-cockpit cruising sailboat featuring an LOA of 50 feet 9 inches, a beam of 15 feet 1 inch, a keel-centerboard shoal draft ranging from 5 feet 10 inches to 11 feet 6 inches, and is currently located in Harpswell, Maine, listed at $750,000.

  • What powers ENDEAVOR, and what performance speeds does she achieve? She is powered by a brand-new 2026 110 hp Yanmar 4JH110 diesel engine with approximately 25 hours, delivering a cruising speed of 7 knots and a maximum speed of 8 knots.

  • What notable upgrades were completed during her recent refit? She underwent an extensive 2025–2026 refit at Hinckley in Rhode Island, featuring a new Yanmar engine, new B&G Zeus plotters and electronics, a Sidepower bow thruster, new Seafrost refrigeration, upgraded Victron electrical systems, North 3di sails, and Awlgrip Flag Blue hull paint.

  • How are accommodations and living spaces configured aboard? She sleeps up to eight people across three private cabins plus the main salon, and includes two electric flush heads, a dedicated stall shower, and a fully equipped wrap-around galley.

Specifications:

  • Length:

    50ft

  • Builder:

    Little Harbor

  • Beam:

    15.08

  • Draft:

    5.83

  • Year:

    1986

  • Displacement:

    52000

  • Hull Type:

    Fiberglass

  • Engine:

    Yanmar, 110 hp

ENDEAVOR | Little Harbor | 50

$750,000

Harpswell, ME, US

1986, Little Harbor 50

Request More Information