CI SEA: A 2021 MJM 53z
Oct 30, 2026 · @Carolyn Garth
Some boats you spot across a harbor and you know who designed them. That happens with MJMs. The sheer sweeps down from a proud, flared bow, the pilothouse sits low and tidy, and the whole boat has that classic to modern look that defines the MJM line. Then you walk around to the stern and find four 400-horsepower Mercury Verados hanging there.
CI SEA is that boat. She’s a 2021 MJM 53z, the flagship of the MJM line, designed by Doug Zurn and built by Boston BoatWorks, and she’s now listed with Wellington Yacht Partners in Vero Beach, Florida. Before we go aboard, I want to spend a little time with the two names behind her, because they explain nearly everything about how she looks and how she runs.
The Doug Zurn eye
Doug Zurn is a naval architect in Marblehead, Massachusetts, and before MJM he was best known for the Shelter Island 38, drawn for Billy Joel and widely considered one of the prettiest powerboats of its day. He grew up in a sailing family, too. As a boy he had the blueprints of his father’s ocean racer, Kahili II, framed on his bedroom wall. You can see that upbringing in his powerboats. They’re slender, easily driven, and drawn by someone who thinks about how a hull moves through water before he thinks about how much he can fit inside it.
Zurn has designed every MJM ever built, and the brief he was handed was not a small one. The bow needed a Carolina flare so it could cross big seas without getting wet. The sheer was to recall a World War II Elco PT boat. The layout came from the Maine lobster boat, and the sightlines from a 1950s Matthews cruiser. It also had to be light, tough and luxurious.
What does that look like on the 53z?
- A long, narrow hull. The 53z has a 3.5:1 waterline length-to-beam ratio, which keeps her stable and efficient at speed.
- A modified deep-V that changes as it goes forward. Aft, the deadrise is about 19 degrees, with dual lifting strakes and chine flats that throw spray outboard. Forward, the entry sharpens considerably, and that Carolina flare keeps the decks dry.
- Outboards that belong. Hanging four engines on a classic Downeast stern could easily have spoiled the look. Zurn sculpted the transom so the outboards read as part of the design rather than an afterthought.
- Shallow water manners. With the engines tilted up, CI SEA draws just 27 inches, a rare thing on a 56-foot cruising yacht.
Built where racing sailboats are built
If Zurn gave the MJM its looks, Boston BoatWorks gave it its bones. Founded by Mark Lindsay and Scott Smith, the yard on Boston Harbor is known for offshore racing sailboats, America’s Cup yachts and high-performance catamarans. Boston BoatWorks built MJMs from the very first hull, until 2021, roughly 300 boats in all.
In the early 2000s, most good powerboats were laid up in polyester or vinylester resin. That’s strong enough, but heavy. MJM and Boston BoatWorks went with epoxy composite construction instead, the same approach the yard used for its racing boats. The weight they saved went back into performance. That’s how the 53z became one of the very few cruising yachts over 50 feet that can run 50 mph, something previously seen mostly on big open center consoles.
CI SEA’s spec sheet reads like a racing builder’s checklist:
- Solid keel, stem and transom corners in E-glass and epoxy
- Hull and deck fused into a single monocoque structure
- ISO (CE Mark) Category A Ocean certification
- Bilges finished in smooth gloss white, with wiring bundled, numbered and fitted with waterproof Deutsch connectors
There’s one more reason the Boston connection matters. In 2021, MJM began moving production to Washington, North Carolina, and today’s lineup centers on 38- and 47-footers. The 53z had a short run, and only a handful came out of Boston. CI SEA is one of them.
Aboard CI SEA
Picture a warm afternoon off Vero Beach. The three electric windshields are down, the side windows slid open, the aft door pulled back, and the pilothouse and aft deck have become one long room on a single level. Then the weather turns, everything closes up, the four-zone, 48,000 BTU air conditioning takes over, and you’re in a quiet, enclosed yacht. That’s the 53z idea, and CI SEA does it beautifully.
The pilothouse is where everyone ends up. There’s U-shaped seating around an electric teak table to starboard, a full-length settee to port, and Stidd helm and companion seats facing a gloss teak dash. Aft, a fixed settee and two movable chairs surround a varnished teak table. Side doors on both sides and twin transom doors to the swim platform make it easy for guests to come and go.
Two steps down, the cherry joinery and gloss teak soles with wenge inlays take over:
- Galley to port. Wolf two-burner induction cooktop, Vitrifrigo two-drawer refrigerator, Isotherm freezer and Corian counters.
- Guest cabin to starboard. Double berth, fold-down desk, a reading chair and private access to the day head with shower.
- Full-beam master forward. Island queen, cherry dressing table, hanging lockers on both sides and an ensuite head with a glass-enclosed shower.
At the helm, twin 16-inch Garmin plotters sit alongside Mercury’s joystick, Skyhook station-holding and autopilot. If you’re coming from a center console, docking a 56-footer this way feels surprisingly familiar. She cruises at about 40 mph and tops out near 50.
Owners who didn’t cut corners
CI SEA’s current owners bought her nearly new in 2022, and they’ve treated her as if they planned to keep her forever. In 2024 they repowered with new quad Mercury HD Verado 400s, which now have roughly 255 hours, and extended the Mercury Platinum warranties to 2032.
The rest of the list, year by year:
- 2023: New laid teak on the aft deck, a new icemaker at the aft bar, an Arid Dry bilge system and a Dock-Mate water filter.
- 2024: An all-new Garmin electronics suite with a rear-view camera, Starlink, refinished non-skid on the decks and cabin top, tinted pilothouse windows, a forward sun pad, custom engine and exterior covers, and refreshed fabrics and bedding throughout.
- 2025: A Sea-Ro watermaker and a new bimini.
The Westerbeke 9 kW generator was serviced in December 2025. A second, never-used set of white UltraLeather pilothouse cushions is in storage.
Look again
So, back to that harbor. From a distance, CI SEA looks like a classic Downeast cruiser, and she is one. Look again, though, and you’ll see a racing builder’s epoxy hull, a Zurn bottom that likes 40 mph, four nearly new outboards under warranty until 2032, and a boat that’s been cared for at every turn.
| CI SEA at a glance | |
| Model | 2021 MJM 53z |
| Designer / builder | Doug Zurn / Boston BoatWorks |
| Price | $1,800,000 |
| Location | Vero Beach, FL |
| LOA / beam | 56’3″ / 15′ |
| Draft (engines up / down) | 27″ / 37″ |
| Power | Quad Mercury HD Verado 400 hp (new 2024) |
| Cruise / top speed | 40 mph / 50 mph |
| Fuel | 920 gal |
| Accommodations | 2 cabins, 2 heads with showers |
Ready to step aboard?
View the full specifications, photo gallery, and listing details on the Wellington Yacht Partners Website.
For inquiries, pricing, or to schedule a private showing of CI SEA in Vero Beach, Florida, please contact our brokerage team today.
