GINGER | Little Harbor WhisperJet 38 | 38ft

Hyannis, MA, US

 

GINGER | Little Harbor WhisperJet 38 | 38ft

$199,500

Hyannis, MA, US

About

PRELIMINARY LISTING

Details to follow

Specifications

  • Length: 38ft
  • Builder: Little Harbor
  • Beam: 12' 6"
  • Year: 1999
  • Hull: Fiberglass
  • Engine: (2) Yanmar, 350 hp

SPECS

  • Builder: Little Harbor
  • Designer: Ted Hood

MEASUREMENTS

  • Length Overall: 38.00 ft
  • Beam Measure: 12' 6"

ENGINE(S)

  • Engine Brand: Yanmar
  • Year Built: 1999
  • Engine Model: 6YLA-STE
  • Engine Type: Inboard
  • Engine/Fuel Type: Diesel
  • Engine Power: 350 hp

  • Engine Brand: Yanmar
  • Year Built: 1999
  • Engine Model: 6YLA-STE
  • Engine Type: Inboard
  • Engine/Fuel Type: Diesel
  • Engine Power: 350 hp

TANKS

  • Fresh Water Tanks: 1 (65 Gallons)
  • Fuel Tanks: 1 (300 Gallons)

Accommodations

  • Number of double berths: 1
  • Number of cabins: 1
  • Number of heads: 1

Steering System
Joystick Control

Manufacturer Provided Description

The Little Harbor WhisperJet 38 is one of a Series that features a modern deep-V hull form designed specifically for jet drives. Each boat has an innovative twin-chine configuration that minimizes waterline beam for performance and fuel economy and maximizes interior volume for accommodations. In addition, the twin chine eliminates annoying "wave slap" common to many boats while at rest. Dead rise angle is 17 degrees at the transom. Each model has a classic hull profile with an aggressive bow overhang and low-profile deck configuration. All models are available as an express cruiser with an open mid-deck area protected by a removable soft top. A focal point of all models is the large and comfortable cockpit salon, featuring an L-shaped settee with casual seating for four and optional deck chairs that can be arranged to accommodate six for dining.

The helm area has been designed to position all instruments and controls at their optimal location in relation to the helmsman. Electronics enclosures have been sized to handle the larger and more sophisticated computer-based charting systems. A work area is located across from the helm, so traditional charts can be used, and space has been provided for electronics repeaters of key navigational data.

The interior accommodations are both straightforward and spacious. The owner's stateroom forward includes a large U-berth (as opposed to the typical narrow V-berth) with two 36-inch wide berths that can be converted into a double with a filler piece. There is a large hanging locker and numerous drawers and storage lockers. A private owner's head and shower is located on one side. Further aft, the layout features a large galley to port with cold-plate refrigerator and freezer, propane stove and abundant storage lockers. The elegant yet functional interior features solid American Cherry trim. The overhead panels are covered with padded fabric and are completely removable. Main bulkhead surfaces are Formica, drawers are solid cherry, and locker doors are Formica with cherry trim. Doors and drawers feature Kroon flush positive-lock latches and roller bearing drawer slides. Cabin soles are varnished teak and holly. As an option, owners may specify cherry throughout the interior.

The main engines are surrounded by a carefully engineered, soundproofed compartment, making the raised salon a comfortable, quiet place while underway, even at high speeds. The water jet system is located well aft for easy access via hatches through the aft deck. The water jet configuration eliminates the need for external shafts, props, and rudders, thereby removing a substantial amount of running vibration and allowing one to virtually run right over floating hazards - such as trap buoys - without fouling. The resulting shallow draft also allows one to safely gunkhole shallow waters off-limits to most boats of this size. As a final benefit, the water jet provides superior maneuverability in tight quarters utilizing twin jet configurations.

The hull and deck are built of molded fiberglass using Vinylester resin and foam core. The hull lamination is further reinforced with a Kevlar hybrid to increase collision strength and add stiffness. All fuel tanks are welded aluminum. Structural bulkheads are cored fiberglass bonded to hull and deck. All deck hardware is polished stainless steel. The deck and hull joint features a low maintenance molded rail with optional teak cap that can be varnished or oiled. Decks and cabin tops can be finished with contrasting non-skid. A molded rubrail with stainless striker is provided.

 

 

How Can I Help?

Hello! I'm Chris Fairfax. It looks like you are interested in purchasing a yacht. I can provide you with more information and specific details and would be delighted to help.

No Thanks