AVA | Sabre 386 | 38ft

ACCOMMODATIONS

AVA has two cabins, which both offer double berths with comfortable mattresses. The aft cabin’s berth is oriented athwartships and has locker and drawer space along with a small settee at the entrance. The forward cabin has a spacious v-berth, hanging lockers, ample storage and a vanity mirror with washbasin. Both cabins have a warm feeling to them with their cherry cabinetry and planked ceilings.  

GALLEY

The galley has a Force-10, 3-burner stove range with oven beneath, along with a microwave. A two-bay stainless-steel sink is installed. The refrigerator has a small freezer section and is accessed by two chest-type top side doors, and also a side access door allowing for easy access to goods within. 

HEAD

AVA was designed with a spacious head which has a divider door, making a proper, separate shower stall. The head itself is an electric Jabsco model and the 30 gallon holding tank is monitored by a Tankwatch 4 unit. 

SALON

To port is an L-shaped settee which converts into a double berth that also serves as seating around the expandable salon table. The table has beautiful inlay work and folds up into the forward bulkhead when not in use. To starboard, a settee runs the length of the salon and can be used as a berth as well. The aft-most section of the settee has a pivoting back rest which can convert this section into a chart table seat. 

ELECTRONICS

• Raymarine E 80 plotter at helm station
• Raymarine 2kW radar mounted on mast (new 2020)
• Raymarine ST6000 autopilot
• Raymarine wind instrumentation
• Raymarine  E120 plotter at interior nav station
• Richie 5" compass 

MECHANICAL/ELECTRICAL

• Yanmar 3JH4E, 40 hp diesel engine
• Control panel including ignition and alarms at cockpit helm station
• 40  gallon aluminum fuel tank
• 90 gallon fresh water tank
• 30 gallon holding tank
• Electrical service: 120 V AC/12 V DC with electrical panel, meters and breakers
• (4) AGM batteries 

RIGGING AND SAILS

• North Sails 3Di NorDac sails (new, summer 2018)
• Mainsail: 444 sq ft
• Genoa:  135 - 515 sq ft
• Harken winches
• Hall spars: Aluminum
• Harken headsail furler

HULL AND DECK

• Sabre sailing yacht hulls are built with vacuum bagged Divinycell PVC foam core and structural E-glass providing one of the stiffest, strongest and most dependable structures
• Closed cell Divinycell PVC foam cored, hand-laminated fiberglass of alternate layers of mat knitted biaxial roving
• ISO NPG gelcoat
• Below waterline, Sabre technology is utilized, consisting of chopped strand glass and vinylester resin as a back up for ISO NPG gelcoat
• Internal deck to hull joint
• Molded-in double boot and single cove stripes
• Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength
• Step transom
• Wing Keel, ballast 7350 lb 

Misc. Deck 

• Plow anchor with chain
• Lewmar windlass
• Mooring lines and fenders
• Flagstaff  

EXCLUSIONS

• Tender and owner's personal belongings will not convey with sale

DISCLAIMER
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.